Welcome to CubChat - The Forum For Honda Cubs (and Similar Motorcycles)
Annoying set back with Crank
Posted by : Neil (92.26.211.144) 
Inappropriate or SPAM?
On Sunday 21/08/16 at 16:22:06
With the piston in place I decided to check the stroke of the 57mm stroke crank supplied by OO Racing. Sadly I discovered the stroke is just 55.7mm ie 1.3mm shorter than it should be. One might argue that 1.3mm isn’t going to matter a great deal and that i needed to change the crank anyway to have a 13mm small end to suit the YX140 piston, and all this is true, except I already had a 56mm stoke crank with 13mm small end sat in a primary clutch engine, so I didn’t need another. So I’m about to contact OO Racing in the hope that I can return the crank as it does not match its description. Blooming annoying as i’ll probably end up paying the return postage and need to pull the Lifan oil pump drive gear back off it ggggrrrrrr.
Message Thread:
Back to main forum
Sorry, this post has timed out and can no longer be responded to (feel free to blame spammers).
If there are more recent replies, you might still be able to reply to those!
Just a counter down here...
