Welcome to CubChat - The Forum For Honda Cubs (and Similar Motorcycles)
RE: Honda Lead air filter removal.
Posted by : Geoff from Preston (85.211.2.253) 
Inappropriate or SPAM?
On Sunday 03/06/12 at 12:24:49
Thanks to all for your suggestions. (I’ll seek advice about removing the mounting bolts Vic, I’ve tried the block of wood Harry & I’ll give the dealer a ring).
With the Innova as far as I can remember I could get away with just removing a side panel. But with the Address the servicing can be done without removing panels (with a little difficulty).
But on the 5000mile service I removed the panels so that I could see underneath, clean the HT leads coil etc. & check the fuel line. The problem is that they overlap & ALL the mid panels had to come off including the seat, I got a rattle & had a job getting rid so I became well practiced, now I can have the panels on & off in about 30min.
But this doesn’t resolve the problem, I think that I may just take all the panels off if my mate Geoff agrees then we may get to the bottom of the problem. It’s a nice little bike & it would be interesting to see what is underneath & give it a good check over.
Message Thread:
Back to main forum
Sorry, this post has timed out and can no longer be responded to (feel free to blame spammers).
If there are more recent replies, you might still be able to reply to those!
Just a counter down here...
