Welcome to CubChat - The Forum For Honda Cubs (and Similar Motorcycles)
RE: cdi
Posted by : Nut and Cheri - Cheltenham (79.75.82.212) 
Inappropriate or SPAM?
On Tuesday 02/07/13 at 00:18:26
Hi Harry. I've wondered that myself. My knowledge of what happens with standard and high performance coils with Cub90 flywheels is based on me trying them out whilst pointing a timing light at the flywheel and a clamp on tacho on the HT lead whilst watching what happens when I increase the revs. I've not tried this with pit bike flywheels because I try not to use them since snapping the end off my Wuyang crank which was possibly down to poor balancing. Logic says it would do the same thing, only the total advance from the trailing edge of the blob to the leading would be less. I'm not sure which end of the timing they chopped off though; less advance at high revs, or more advance at low revs. Sorry, I can't be more helpfull.
Message Thread:- cdi - james Mon 01/07/13 at 03:25:27
- RE: cdi - Kebob Mon 01/07/13 at 05:29:18
- RE: cdi - Fuzz, North west Bulgaria Mon 01/07/13 at 10:55:14
- RE: cdi - nige Mon 01/07/13 at 17:34:22
- RE: cdi - Nut and Cheri - Cheltenham Mon 01/07/13 at 17:51:58
- RE: cdi - Bogger Mon 01/07/13 at 17:58:34
- RE: cdi - Harry Notts Mon 01/07/13 at 19:47:53
- RE: cdi - Nut and Cheri - Cheltenham Tue 02/07/13 at 00:18:26
- RE: cdi - Harry Notts Wed 03/07/13 at 03:01:46
- RE: cdi - james/Dorset Mon 01/07/13 at 21:09:46
- RE: cdi - Diesel - Brentwood Mon 01/07/13 at 22:06:50
- RE: cdi - Nut and Cheri - Cheltenham Tue 02/07/13 at 00:26:12
- RE: cdi - Diesel - Brentwood Tue 02/07/13 at 00:52:55
- Melted piston... - Newt Wed 03/07/13 at 03:58:27
- RE: cdi - radar shropshire Tue 02/07/13 at 01:30:56
- RE: cdi - Fuzz, North west Bulgaria Tue 02/07/13 at 23:54:46
Back to main forum
Sorry, this post has timed out and can no longer be responded to (feel free to blame spammers).
If there are more recent replies, you might still be able to reply to those!
Just a counter down here...
