Welcome to CubChat - The Forum For Honda Cubs (and Similar Motorcycles)
RE: Big Mig and and his dodgy bottom end.
Posted by : Nut and Cheri (212.139.252.19) Inappropriate or SPAM?
On Saturday 01/08/15 at 15:28:34
This ends the story of Big Migs bottom end change, but before I close the topic I thought I would add one last handy tip when it comes to getting gearboxes to change nicely. In the photo you can see that the gear lever has been depressed and the selector barrel has revolved until the wheel on the end of the little sprung loaded arm has located centrally in the corresponding depression on indexing plate on the end of the drum. If when you depress the gear lever the little wheel doesn't finish up centrally in the depression then grind a bit off or add a little weld as required to the arm where my finger is pointing
Happy Tinkering all.
Nut
Message Thread:
Back to main forum
Sorry, this post has timed out and can no longer be responded to (feel free to blame spammers).
If there are more recent replies, you might still be able to reply to those!
Just a counter down here...