Welcome to CubChat - The Forum For Honda Cubs (and Similar Motorcycles)
RE: SWING ARM C70
Posted by : nige (86.172.29.193) 
Inappropriate or SPAM?
On Sunday 12/04/15 at 14:00:45
Hi chaps, the innova one will fit but you have to drill out the frame tube from 10mm to 12mm provided the tube is thick enough , some are. if not you can weld a very thick washer/spacer at the end which will help make up the width difference. as your probably aware its only the end of the frame tube that's reduced to 10mm as it much wider in the middle . having done that you then have to machine the sprocket hub/carrier down by 9/10mm if I remember, to bring it inline with front sprocket as the anf engine is this much wider from centre of engine to centre of sprocket . when you then go to fit wheel you,ll notice s/arm is approx 40mm longer and wheel rubs 
. I,ve only done this on a modified one with no mudguard so beware 
Message Thread:
Back to main forum
Sorry, this post has timed out and can no longer be responded to (feel free to blame spammers).
If there are more recent replies, you might still be able to reply to those!
Just a counter down here...
