CubChat - For Honda C50, C70 and C90 Chat

Welcome to CubChat - The Forum For Honda Cubs (and Similar Motorcycles)

RE: Priming an auto adjusting camchain adjuster

Posted by : Boofbee (90.244.138.229)

Inappropriate or SPAM?
On Monday 13/05/13 at 22:30:26

Yes. On your pic remove the bolt to left of the gear change shaft. Lay the bike over at 45 degrees and pump oil in the hole until it dribbles out. Bolt back in. That should prime the adjuster.

Message Thread:

Priming an auto adjusting camchain adjuster - Glenn Ashby Mon 13/05/13 at 20:11:02

RE: Priming an auto adjusting camchain adjuster - Newt Mon 13/05/13 at 20:24:47

RE: Priming an auto adjusting camchain adjuster - Glenn Ashby Mon 13/05/13 at 22:01:29

RE: Priming an auto adjusting camchain adjuster - wiganbob Mon 13/05/13 at 22:28:33
RE: Priming an auto adjusting camchain adjuster - Boofbee Mon 13/05/13 at 22:30:26

RE: Priming an auto adjusting camchain adjuster - Glenn Ashby Tue 14/05/13 at 00:23:24

RE: Priming an auto adjusting camchain adjuster - gonzo Tue 14/05/13 at 00:57:22

RE: Priming an auto adjusting camchain adjuster - Glenn Ashby Tue 14/05/13 at 02:48:10

RE: Priming an auto adjusting camchain adjuster - Glenn Ashby Wed 15/05/13 at 15:41:14

RE: Priming an auto adjusting camchain adjuster - Glenn Ashby Fri 17/05/13 at 14:57:03

Back to main forum

Sorry, this post has timed out and can no longer be responded to (feel free to blame spammers).
If there are more recent replies, you might still be able to reply to those!

Just a counter down here...