CubChat - For Honda C50, C70 and C90 Chat

Welcome to CubChat - The Forum For Honda Cubs (and Similar Motorcycles)

RE: Thermometer-For engine oil?

Posted by : Boo (94.197.228.158)

Inappropriate or SPAM?
On Monday 31/12/12 at 11:12:25

That looks good. 120c is the ideal scale for an engine. This is mine (250c was all I could find on Ebay). I just drilled a hole and araldited it in.
Mine's a secondary clutch engine, so it would probably have to go somewhere else on a primary.

It actually goes in a bit further than this.. This was just the first experimental hole the size of the thin rod, but I drilled a bigger one to sit the large bit of the dial against the case and the rod reaches to the bottom of the oil.

Message Thread:

Thermometer-For engine oil? - JohnS South Staffs Sun 30/12/12 at 19:40:47

RE: Thermometer-For engine oil? - Kebob Sun 30/12/12 at 19:55:21

RE: Thermometer-For engine oil? - Harry Notts Sun 30/12/12 at 23:28:43

RE: Thermometer-For engine oil? - Diesel - Brentwood Sun 30/12/12 at 23:59:40

RE: Thermometer-For engine oil? - Kebob Mon 31/12/12 at 01:14:36

RE: Thermometer-For engine oil? - Boo Mon 31/12/12 at 11:12:25

RE: Thermometer-For engine oil? - Diesel - Brentwood Mon 31/12/12 at 13:56:09
RE: Thermometer-For engine oil? - JohnS South Staffs Mon 31/12/12 at 13:56:50

Oil Temp Gauge Fitted - JohnS South Staffs Tue 01/01/13 at 18:39:22

RE: Oil Temp Gauge Fitted - Kebob Tue 01/01/13 at 20:39:58

RE: Oil Temp Gauge Fitted - JohnS South Staffs Tue 01/01/13 at 22:36:23

RE: Oil Temp Gauge Fitted - Kebob Tue 01/01/13 at 23:13:03

Back to main forum

Sorry, this post has timed out and can no longer be responded to (feel free to blame spammers).
If there are more recent replies, you might still be able to reply to those!

Just a counter down here...